|
|||||||
| Register | Members List | Social Groups | Calendar | Search | Today's Posts | Mark Forums Read |
Connect with Facebook
|
| Hawaii RC Crawlers Come here to discuss the latest with HRCC! |
 |
| Thread Tools | Display Modes |
|
|||||||
| Register | Members List | Social Groups | Calendar | Search | Today's Posts | Mark Forums Read |
Connect with Facebook
|
| Hawaii RC Crawlers Come here to discuss the latest with HRCC! |
|
| Thread Tools | Display Modes |
03-03-2009, 11:49 PM
|
#1 | ||||
|
Sand Facial
Additional Info
Credits: 1,710.15
 |
axle question
is it possible to swap out the guts of a f350 highlift axle into the tlt axle housing?
|
||||
|
|
|
03-04-2009, 10:51 PM
|
#2 | ||||
|
Sand Facial
Additional Info
Credits: 1,727.55
|
mostly.... the diff assemblies are the same except for the highlifts lock pin feature, but they are interchangable. The outer stub shafts and knuckles are exactly the same, The problem is the axle shafts themselves. The highlift's shafts are just a tad bit longer than tlts. The added length is on the outside so internally thay will mount up in the tlt housing but will stick out a little more. It is far enough out that when you try to mount the knuckles they won't line up. This is because the "C" portion on the highlifts stick out a little farther than tlts. So you'll need tlt axle shafts.
|
||||
|
|
|
|
03-19-2009, 10:54 AM
|
#3 | ||||
|
It's 4:19, got a minute?
Additional Info
Credits: 1,678.30
|
Josh, I got plenty inner shafts, call me if you like some.
__________________
 |
||||
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
